Olivetti d-Copia 300 Service Manual page 269

2FD/2FF/2FG
(6) Detaching and refitting the fixing unit thermistor 1 and 2
Follow the procedure below to replace the fixing unit thermistor 1 and 2.
Procedure
1. Remove the fixing unit (see page 1-6-36).
2. Remove the upper fixing cover (see page 1-
6-36).
3. Disconnect the connector of the fixing unit
thermistor 1.
4. Remove the heat roller (see page 1-6-39).
5. Remove the screw and disconnect the
connector, and then remove the fixing unit
thermistor 2.
6. Turn the fixing unit over and remove the
screw to remove the fixing unit thermistor 1.
1-6-40
Connector
Figure 1-6-76
Connector
Figure 1-6-77
Fixing unit thermistor 1
Figure 1-6-78
Fixing unit thermistor 2