Installing The 1000-Sheet Finisher (Option) - Olivetti d-Copia 300 Service Manual

2FD/2FF/2FG

1-3-15 Installing the 1000-sheet finisher (option)

Procedure
1. Open the left cover of the copier.
2. Remove the two screws securing the
feedshift guide assembly and then the
assembly.
3. Fit the curl eliminator to the left cover such
that the projections on the cover fit into the
two ends of the curl eliminator.
4. Secure the curl eliminator using the two
screws removed in step 2.
5. Close the left cover.
6. Fit the latch catch to the left cover using two
M4 × 10 binding screws.
1-3-58
Screws
Feedshift guide
assembly
Figure 1-3-136
Projection
8
Screw
Curl eliminator
Figure 1-3-137
Left cover
M4 × 10 binding screws
Latch catch
Figure 1-3-138
Left cover
Screw
Projection