Olivetti d-Copia 300 Service Manual page 172

Maintenance
item No.
U962 Setting the type of fixing unit
Description
Sets the type of fixing unit.
Purpose
To change the setting according to the type of the fixing unit.
Method
Press the start key. The screen for selecting an item is displa yed.
Setting
1. Select New or Old. The selected item is displa yed in reverse.
Display
FIXING UNIT 0
FIXING UNIT 1
FIXING UNIT 2
Initial setting: FIXING UNIT 1
2. Press the start key. The setting is set, and the screen f o r selecting a maintenance item No . is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear k e y. The screen for
selecting a maintenance item No. is displayed.
U971 Specifying the aging before copying
Description
Selects whether to perform aging before copying.
Purpose
To set according to the preference of the user. When copying A3 or B4 sized paper, aging before copying takes
extra time to start the first copy. To reduce the time for the first copy, select OFF .
Method
Press the start key. The screen for selecting an item is displa yed.
Setting
1. Select ON or OFF . The selected item is displa yed in reverse.
Display
ON
OFF
Initial setting: OFF
2. Press the start key. The setting is set, and the screen f o r selecting a maintenance item No . is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear k e y. The screen for
selecting a maintenance item No. is displayed.
U989 HDD Scandisk
Description
Restores data in the hard disk by scanning the disk.
Purpose
If power is turned off while accessing to the hard disk is perf o rmed, the control information in the hard disk drive
may be damaged. Use this mode to restore the data.
Method
1. Press the start key. The screen for executing is displayed.
2. Press EXECUTE on the touch panel. It is displayed in reverse.
3. Press the start key. When scanning of the disk is complete , the execution result is displayed.
4. Press the stop/clear key. The screen for selecting a maintenance item No . is displayed.
Completion
To exit this maintenance item without e xecuting scandisk, press the stop/clear k ey. The screen for selecting a
maintenance item No. is displayed.
Description
Description
Type 0
Type 1
Type 2
Description
Performing the aging before copying
Not performing the aging before copying
2FD/2FF/2FG-3.0
1-4-73