Olivetti d-Copia 300 Service Manual page 93

2FD/2FF/2FG
17. Lift the stapler unit further up, and then lower
it.
18. Set the intermediate tray unit back into the
finisher, and close the front cover.
19. Fasten the main tray to the finisher using the
two fixing guide pins and the two hexagonal
cap nuts.
20. Hold the auxiliary tray vertically, attach it to
the top of the finisher, and lower it toward the
exit side.
1-3-68
Stapler unit
Figure 1-3-165
Hexagonal cap nuts
Main tray
Fixing guide
pins
Figure 1-3-166
Figure 1-3-167
Auxiliary tray