MANIFOLDS AND EXHAUST GAS RECIRCULATION (EGR)
88
4. Position intake manifold on cylinder heads.
Figure 115 Dog point bolts and stud bolts
1.
Bolt (M6 x 95 dog point) (11)
2.
Bolt (M6 x 95) stud (5)
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
5. Loosely install 11 dog point bolts and 5 stud bolts.
EGES295-2
Follow all warnings, cautions, and notes.
© 2006 International Truck and Engine Corporation