Mounting Engine On Stand - International VT 365 Service Manual

52
Figure 43 Engine Stand Mounting Bracket
WARNING: To prevent personal injury or
death, use only grade 8 bolts to secure Engine
Stand Mounting Bracket to engine and engine lift
stand. Other grade bolts may shear, causing the
engine to fall off engine or engine lift stand.
NOTE:
See manufacturer's
(included with engine lift stand and Engine Stand
Mounting Bracket).
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.

MOUNTING ENGINE ON STAND

Figure 44 Mounting bolts for Engine Stand
Mounting Bracket
7. Position Engine Stand Mounting Bracket (Table 3)
8. Mount engine on engine lift stand using four grade
safety instructions
EGES295-2
Follow all warnings, cautions, and notes.
© 2006 International Truck and Engine Corporation
1. Grade 8 mounting bolts (4) to engine block
2. Grade 8 mounting bolts (4) to engine lift stand
on right side of engine. Secure bracket plate with
four grade 8 mounting bolts and washers.
8 mounting bolts.