International VT 365 Service Manual page 85

MANIFOLDS AND EXHAUST GAS RECIRCULATION (EGR)
Figure 96 Dog point bolts stud bolts
1. Bolt (M6 x 95 dog point) (11)
2. Bolt (M6 x 95) stud (5)
3. Remove 11 dog point bolts and 5 stud bolts.
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Figure 97 EGR coolant inlet coupling
1.
2.
3.
4.
4. Align single index mark (if visible) or one of the
EGES295-2
Follow all warnings, cautions, and notes.
© 2006 International Truck and Engine Corporation
Index feature on coolant supply port cover
Recess
Single index mark
Flat edge representing duel index marks
recesses on the end of the EGR inlet coolant
coupling (Figure 97) with index feature located on
coolant supply port cover.
This aligns the detentes inside the coupling with
the raised slide-off area of the coolant supply port.
81