International VT 365 Service Manual page 86

MANIFOLDS AND EXHAUST GAS RECIRCULATION (EGR)
82
Figure 98 EGR coolant inlet coupling removal
from coolant supply port
1. Index feature on EGR coolant supply cover
2. Coolant supply port
3. EGR coolant inlet coupling
5. Slide the coupling off the port.
6. Slide EGR coolant inlet coupling toward rear of
engine, away from coolant supply port.
Figure 99 V-clamp on EGR Cooler
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
7. Remove V-clamp from EGR cooler.
Figure 100
8. Lift intake manifold assembly straight up to
9. Remove and save steel gasket for EGR cooler.
10. Put protective magnetic covers over intake ports
EGES295-2
Follow all warnings, cautions, and notes.
© 2006 International Truck and Engine Corporation
Intake manifold and EGR cooler
remove.
NOTE: The EGR cooler will be bolted to the intake
manifold.
in cylinder head (Table 9).