MANIFOLDS AND EXHAUST GAS RECIRCULATION (EGR)
96
Specifications
Table 7 Intake and Exhaust Manifolds
Exhaust Manifold
Maximum allowable warpage
Intake Manifold
Maximum allowable clearance
Special Torque
Table 8 Manifolds and Exhaust Gas Recirculation (EGR)
Intake manifold, M6 x 95 hex flange bolt or stud bolt
dog point
Intake heat shield, M6 hex flange nut
Exhaust manifold hex flange bolts
EBP tube assembly
1
1
EBP tube connector
Shielded exhaust tube to exhaust manifold (left side)
Shielded tube exhaust to right side exhaust tube
Exhaust tube to exhaust manifold (right side)
Turbocharger exhaust adapter V-clamp
EGR cooler V-clamp
1
Apply anti-seize compound to bolt threads before assembly.
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
1
1
1
1
EGES295-2
Follow all warnings, cautions, and notes.
© 2006 International Truck and Engine Corporation
0.08 mm (0.003 in)
Between ports: 0.13 mm (0.005 in)
Total: 0.25 mm (0.010 in)
11 ± 1 N·m (96 ± 10 lbf·in)
11 ± 3 N·m (96 ± 24 lbf·in)
38 ± 4 N·m (28 ± 3 lbf·ft) (Figure 122)
30 ± 1 N·m (22 ± 1 lbf·ft)
14 - 15 N·m (120 - 132 lbf·in)
27 ± 4 N·m (20 ± 3 lbf·ft)
27 ± 4 N·m (20 ± 3 lbf·ft)
27 ± 4 N·m (20 ± 3 lbf·ft)
12 N·m (108 lbf·in)
6 N·m (48 lbf·in)