TechniSat DIGIT MF4-K CC User Manual page 92

> Now use the arrow keys to mark the desired pro-
gramme.
> Use the arrow keys up/down to move the marker
around the list one line at a time.
> Use the arrow keys left/right to move around the
list one page at a time.
> Press the OK key to accept a programme into the
timer memory.
Date
> Use the arrow keys to mark the column Date.
> Use the numeric keys to enter the date (in 4-digit
format) on which the timer event is to take place.
Start
> Use the arrow keys to mark the column Start.
> In this line, use the numeric keys to enter the star-
ting time for the timer.
Stop
> Repeat the steps as for "Start"in order to enter the
stopping, or ending time (except in the case of pro-
gramme change timers).
Repeat
> Use the arrow keys to mark the column Rep.
> Confirm by pressing OK.
A selection window will be displayed, presenting
various repeat options.
1x Timer active once
T Daily repeat
1 W Repeat once per week
1-5 Repeat only on weekdays
6-7 Repeat only on weekends
> Use the arrow keys up/down to select the desired
function.
> Press OK to accept the setting into memory.
Accepting data into memory
> When you have completed the programming, press
the yellow function key Accept, to accept the data
into memory.
92