TechniSat DIGIT MF4-K CC User Manual page 72

(Fig. 5-6)
(Fig. 5-7)
Updating Software
When you have completed the programme scan, the digital
receiver will check whether a new version of the operating
software is available via cable. In case new software is avai-
lable, you can perform an automatic software update.
> Use the arrow keys left/right to select the field
Update, and confirm by pressing OK.
(Fig. 5-6) The new software for your unit will now be
downloaded. This procedure may take several minu-
tes.
Terminating the installation assistant
> Confirm the final message (Fig. 5-7) of the installation
assistant by pressing OK, this will return you to nor-
mal operation.
72