Time Difference Gmt (Hours); Country; Remote Control Code; Standby Clock - TechniSat DIGIT MF4-K CC User Manual

6.2.1 Time difference to GMT (hours)
Your unit is equipped with a clock. This is synchronised via
satellite with Greenwich Mean Time.
If in the category Country (Point 6.2.2) you have selected
the setting None, then you must simply correct the clock
time corresponding to your local time using the arrow keys
left/right. In the case of Germany, the difference is
+1 hour in winter, +2 hours in summer.

6.2.2 Country

This function enables the automatic change from standard to
daylight savings (summer/winter) time.
> Use the arrow keys left/right to enter your loca-
tion in the line Country.

6.2.3 Remote control code

You may control up to four different appliances, all using the
same remote control code, via the remote control unit of your
receiver. If two receivers are operated in the same room,
there may be unintended operating problems. To avoid this
problem,you must set different remote control options for the
two receivers.
> To do this, press down the OK key as well as either
the SAT1 or SAT2 key simultaneously.

6.2.4 Standby clock

In this line you must decide whether the time should be
displayed on the receiver while it is in stand-by mode.
> In this line, use the arrow keys left/right to set the
mode of the standby clock to on or off.
> Press the Back key to return to the menu Settings,
or press the Menu key to return to normal operation.
The settings will be saved to memory automatically.

6.3 Audio/Video settings

To optimise your digital receiver for use with your television
set, you may make further settings in the menu Audio
/Video settings.
> Press the Menu key to display the Main Menu.
> Use the arrow keys up/down to mark the line
Settings.
74