TechniSat DIGIT MF4-K CC User Manual page 93

If under the heading Programme you have selected
a programme that is blocked in terms of Point 8.3, you
will first have to enter the PIN code before the data
can be transferred to memory.
> Press the TV/Radio key to return to normal opera-
tion.
7.16.2 Timer overview
The timer overview function gives you an overview of all
timer events already programmed.
> To go to the menu Timer overview, call up the
menu Manage timer as described above.
> Use the arrow keys up/down to mark the line
Timer overview.
> Confirm by pressing OK.
If there are overlapping timer events, these overlaps will
be marked in red.
7.16.3 Change timer programming
> To change an existing timer setting, use the arrow
keys up/down to mark the timer event you wish to
change.
> Press the yellow function key Change to go to the
settings of the marked timer. Make the changes as
described in Point 7.16.1.
> When you have completed the programming, press
the yellow function key Accept to accept the data
into memory.
7.16.4 Delete timer programming
> To delete an existing timer setting, use the arrow
keys up/down to mark the setting.
> Press the green function key Delete.
A message will be displayed: "Do you really want to
delete this timer?"
> Use the arrow keys left/right to select Yes.
> To delete the timer setting, confirm by pressing OK.
93