Service Settings; Delete All Programmes - TechniSat DIGIT MF4-K CC User Manual

(Fig. 8-19)
(Fig. 8-20)
(Fig. 8-21)

8.5 Service settings

You can revert to the original default settings pre-programmed
at the factory at any stage. In addition, if you find that the pro-
gramme list is outdated because of changes made by the
programme providers, you may delete the programme list
completely, and then perform a new programme scan. Please
note that
after you have deleted the list, you must then start a program-
me scan, and must then copy the desired programmes from
the Total list to the Favourites list.
> Press the Menu key to call up the Main Menu.
(Fig. 8-19)
> Now use the arrow keys up/down to mark the
menu line Settings.
> Confirm by pressing OK.
The sub-menu Settings will be displayed. (Fig. 8-20)
> Use the arrow keys up/down to mark the menu
line Service settings.
> Confirm by pressing OK.
The sub-menu Service settings will be displayed
(Fig. 8-21)
8.5.1 Activate default setting
After this function is called up, the default factory program-
ming will be implemented again, all own settings will be dele-
ted, and the installation assistant AutoInstall will be star-
ted.
> Use the arrow keys up/down to mark the line
Activate default setting.
> Confirm by pressing OK.
The message will be displayed: "Do you really want to
activate the default setting?".
> Use the arrow keys left/right to mark either Yes
or Abort.
> Confirm by pressing OK.

8.5.2 Delete all programmes

This function serves to delete the entire programme memory.
> Use the arrow keys up/down to mark the line
Delete all programmes.
> Confirm by pressing OK.
The message will be displayed:"Do you really want to
delete all programmes?".
108