Encryption Pin-Code; Volume Control - TechniSat DIGIT MF4-K CC User Manual

(Fig. 7-9)
> To select one of the starting times available, press the
Option key. A selection window will open, displaying
the available starting times. (Fig. 7-9)
> Use the arrow keys up/down to select the desired
starting time, and confirm by pressing OK.
Provided the programme has been validated for the
starting time selected, you can view it at the desired
time.

7.3.2 Encryption PIN-Code

Your digital receiver is equipped with a parental control featu-
re, which blocks access to specific selected programmes (see
Point 8.3). In addition, in the case of encrypted broadcasts,
individual programmes not suitable for viewing by children
can be given a prior block by means of a parental control
code. In order to decode the specific programme for viewing,
the PIN code must be entered. This PIN code is stored on
the Smartcard. You will be advised of the code when you
receive the card. The PIN code must therefore not be con-
fused with the Unit PIN code of the digital receiver (Point
8.3).
If you switch to a channel that is currently broadcasting a pre-
blocked programme, a message will be displayed.
> To view the programme, use the numeric keys to
enter the 4-digit PIN code.
> As soon as the code has been correctly entered, the
programme can be viewed normally.
If the code has been entered incorrectly, you can enter
the PIN code again, or press Back to exit from the
menu.

7.4 Volume control

Your digital receiver is equipped for volume control. This
makes operation of the receiver more convenient, as you thus
have all important functions combined on the remote control
of the receiver, and will only rarely have to use the remote
control of your television set. When the digital receiver is swit-
ched on, sound volume will be set at the level last used.
> Adjust the volume of your digital receiver using the
Volume + key to increase the volume, and Volume
- to decrease the volume.
> Press the Sound on/off key to mute the sound,
press the key again to switch sound back on again.
80