Using The Numeric Keys; Using The Navigator (Programme List); Selecting A List - TechniSat DIGIT MF4-K CC User Manual

7.2.2 Using the numeric keys

> You may use the numeric keys to enter the desired
programme number.
For example:
1
1, then 4
2, then 3, then 4
When entering prtogramme numbers consisting of several
digits, you have approximately 3 seconds after pressing a
key to complete the entry.
If you wish to enter a programme number consisting of only
one or two digits, you can speed up the switching procedure
by holding down the key a little longer on the last digit.

7.2.3 Using the Navigator (Programme list)

> Press OK.
The programme list navigator will be displayed. In TV
mode, only TV programmes will be shown, and only
radio programmes when in Radio mode. The program-
me currently selected is marked. (Fig. 7-1)
> Now use the arrow keys up/down to mark the
desired programme.
> Press the OK key to display the marked programme.
> Use the arrow keys up/down to move the market
in the list by one line at a time.
> Use the arrow keys left/right to move back and
forth in the list one page at a time.

7.2.3.1 Selecting a list

You receiver is equipped with several programme lists, desi-
gned to make it easier for you to find a programme. You may
select your Favourites list (see Point 8.1), or view the
alphabetically sorted Total List, or view a list sorted by
Providers.
> Press the OK key. The active programme list will be
displayed.
> Use the red function key Category to open a win-
dow showing the types of programme lists
(Favourites list, Provider lists and Total list).
The active type of programme list is marked. (Fig. 7-2)
> Use the arrow keys up/down to select a type of
programme list, e.g. Total list.
for programme slot 1
for programme slot 14
for programme slot 234
77
(Fig. 7-1)
(Fig. 7-2)