Sleep Timer; Channel Information; Video Text - TechniSat DIGIT MF4-K CC User Manual

7.11 Sleep timer

> Press the Sleep Timer key repeatedly to set the
switch-off time of the receiver in the range of
15 minutes to 2 hours.
When the selected time has elapsed, the receiver will
switch automatically to Stand-by mode.

7.12 Channel information

> Press the green function key (Channel information)
to display data relating to the channel selected (Fig. 7-
14).
> In addition, you can use the coloured function keys to
obtain and display additional Audio/Video informa-
tion, Programme information and, where applicable,
information on the encryption system (CA) used.
> Press the Menu key to exit from the information func-
tion.

7.13 Video text

7.13.1 Using the video text decoder of your televi-
sion set
Wherever it is broadcast, video text will be supplied to your
television set. To operate the video text display, use the
remote control of your television set. If you experience pro-
blems with your television set, such as overlapping of video
text and picture content, you should set your digital receiver
to FBAS mode (Point 6.3.4).
7.13.2 Using the internal video text decoder
As an alternative, you may use the integrated TOP video text
decoder to display the information. With TOP video text all
text pages are automatically divided into groups and blocks,
which makes the video text more readable.
> Switch to the programme on which you wish to
view video text information.
> Press the Videotext key to switch on the video text
display. (Fig. 7-15)
> Use the numeric keys to enter the video text page
you wish to view. Your entry will be displayed in the
top left hand corner of the screen.
All video text providers use page 100 to show the
index or contents.
(Fig. 7-15)
83
(Fig. 7-14)
VT Group VT Block