For Daily Use; Switching On And Off; Channel Selection; Using The Channel Up/Down Keys - TechniSat Digit HD 8SX Short Instructions

Position B/Option B
> Use the arrow keys up/down to highlight the satellite you wish to receive at the DiSEqC
setting Position B/Option B and confirm by pressing OK. In the next step, you should
check on the correct configuration of your antenna.
> If you wish to accept the settings entered, use the arrow keys up/down to highlight the
field Yes, and confirm by pressing OK.
Position A/Option B
> Use the arrow keys up/down to highlight the satellite you wish to receive at the DiSEqC
setting Position A/Option B and confirm by pressing OK.
Position B/Option B
> Use the arrow keys up/down to highlight the satellite you wish to receive at the DiSEqC
setting Position B/Option B and confirm by pressing OK. In the next step, you should
check on the correct configuration of your antenna.
> If you wish to accept the settings entered, use the arrow keys up/down to highlight the
field Yes, and confirm by pressing OK.

For daily use

Switching on and off

> Press the On/Standby key either on the digital receiver or the remote control to switch the
receiver on.
> Press the same key again to switch the receiver off again.

Channel selection

Using the channel up/down keys

> Use the channel up/down keys on the remote control or on the receiver to move up or
down the list one channel slot at a time.
Return to the last channel selected
> Pressing the Back key on the remote control will take you back to the last channel se-
lected.
> Press the key again to return to the channel previously selected.

Using the numeric keys

You may use the numeric keys to enter the desired channel number.
For example: 1
1, then 4
2, then 3, then 4
for channel 1
for channel 14
for channel 234
8