Requirements On The Throttle Lever - Rotax 912 Series Installation Manual

15.4) Requirements on the throttle lever

See Fig. 63.
Adjustable positive stops for idle- and full throttle position are of course required.
These stops have to be designed such to render adjustibility and to prevent
overload of the idle stop on the carburetor.
The sketch (Fig. 63) depicts a feasible arrangement.
Startleistung
Take off power
Effectivity: 912 Series
Edition 1 / Rev. 0
BRP-Rotax
INSTALLATION MANUAL
Leerlauf
Idle
Fig. 63
09137
May 01/2007
page 97