2) Fuel Pressure Control - Rotax 912 Series Installation Manual

12
fuel pressure
sensor connection
9
to carburetor

14.4.2) Fuel pressure control

Effectivity: 912 Series
Edition 1 / Rev. 0
BRP-Rotax
INSTALLATION MANUAL
10
11
to fuel tank
4
to carburetor
from fuel pump
09192
See Fig. 56 and 57.
- hose connection on fuel pump (1) inlet by slip-on joint. See fig. 56.
Fuel intake connection (9)
outside dia. ..... 9 mm (.35 in.)
slip-on length: . max. 24 mm (.95 in.)
Fuel outlet connection (10)
outside dia. ..... 6 mm (.24 in.)
slip-on length: . max. 24 mm (.95 in.)
■ CAUTION:
Ensure at installation of the supply line to fuel pump
that no additional moments or load will rest on the
pump!
■ CAUTION:
Utilize max. slip on length. Secure hoses with suitable
screw clamps or crimp.
- hose connection on fuel pump (2) supplied with fire sleeved lines.
See fig. 57.
Fuel intake connection (12):
fitting (15) ........ 9/16-18 UNF (AN-6)
Tightening torque:
Fuel outlet connection (13)
hose nipple (14)
to fuel pressure gauge
6
fuel pressure
sensor connection
9
to carburetor
Fig. 55
15 Nm (135 in.lb)
3/4 DIN 7642
5
7
to fuel tank
8
4
to carburetor
from fuel pump
09139
page 88
May 01/2007