Assembling Plastic Cover; Connecting A Headset; Connecting A Usb Data Cable - Siemens Gigaset S4 professional User Manual

Putting the Handset into Operation

Assembling plastic cover

Connecting a headset

Connecting a USB data cable

You can connect a standard USB data cable
with a mini B jack to the back of your hand-
set to connect the handset to a PC
Page 83.
•
•
•
18
Remove belt clip (if attached)
Page 17.
Remove battery cover
Connect the USB data cable to the USB
port (1).
Use the supplied plastic cover for the headset port
to achieve optimum sound in speakerphone mode.
Once the plastic cover has been removed, you can
connect a headset to the left side of the handset
using a 2.5 mm jack.
The headset volume is the same as the volume set
for the earpiece
Replace the plastic cover after using the headset to
achieve optimum sound in speakerphone mode.
Page 15.
Page 20.
1