Fitting The Attachment Clip; Connecting The Usb Data Cable; Connecting The Headset - Siemens HiPath 4000 Operating Instructions Manual

Putting the handset into service

Fitting the attachment clip

Press the belt clip onto the back of the handset until the tabs on the clip
engage in the recesses on the phone.

Connecting the USB data cable

You can connect a standard USB data cable
with a mini-B connector to the underside of
your handset in order to synchronise your
handset with a PC
Connect the USB data cable to the USB
jack (1).

Connecting the headset

18
Page 107.
You can connect a headset with a 2.5 mm jack plug to the
left side of your handset.
The headset volume corresponds to the setting for the ear-
piece volume Page 20.
1