Configuring Video Behaviors - LifeSize Room User Manual

Configuring Video Behaviors

To configure video behaviors of your LifeSize Room system, follow these steps:
1. Select the
2. Select the Administrator Preferences button.
3. Enter the administrator password and press OK.
4. Select the Video button.
Note: To adjust display type or resolution or to specify the video inputs to display on
the auxiliary output, select the Displays button.
5. Adjust video preferences as desired and press OK to save changes.
To prevent far end users from controlling your near end camera, disable the Far
Control of Near Camera preference.
To define the pan direction of the camera relative to the physical arrangement of the
camera in your LifeSize Room system, select Perceived for the camera to pan left or
right from the user's perspective, when facing the camera. Select Reversed for the
camera to pan to the camera's actual left or right.
You can control the far end camera if it is enabled properly. Far end camera control
works only when you are in a call and the far end side supports Annex Q. You control a
far end camera in the same manner as you would control a near end camera.
You can define custom input names by changing the default values. Customized names
for inputs are limited to 16 characters.
Configuring VGA Input
You can adjust the horizontal and vertical positioning of your VGA display, as well as
perform coarse or fine tuning of the clock frequency and adjust brightness and contrast.
To adjust VGA input settings, access Diagnostics : VGA Input.
28
button from the main screen to access the System menu.
LifeSize Room User Guide