Table of Contents
Advertisement
Locale and Time Settings
Administrators can also change the language or configure options for the system locale by
accessing Administrator Preferences : Locale.
To set the system time, refer to "Setting System Time" on page 33.
To set the time zone, follow these steps:
1. Select the
2. Select the Administrator Preferences button.
3. Enter the administrator password and press OK.
4. Select the Locale button.
5. Select the Time Zone preference and choose the city corresponding to the time zone in
which your LifeSize Room is located.
Configuring Audio Behaviors
To configure audio behaviors of your LifeSize Room system, follow these steps:
1. Select the
2. Select the Administrator Preferences button.
3. Enter the administrator password and press OK.
4. Select the Audio button.
5. Adjust audio preferences as desired and press OK to save changes.
To change the order of available audio codes for the system to use to place calls, select
the Audio Codec Order preference, select a codec and press the right arrow to move
the entry up in the list or press the left arrow to move the entry down in the list.
Note:
To configure behaviors of the LifeSize Phone when it is connected to a LifeSize
Room system, you must change the audio preferences in LifeSize Room. Configuration
of the LifeSize Phone from the phone interface is unavailable when it is used in a room
configuration.
By default, your LifeSize Room system is configured so that audio in a video call is
transmitted from the line out (typically, your display). Audio in a voice call is transmitted from
the LifeSize Phone. If you wish all audio to be transmitted from the LifeSize Phone (for both
voice and video calls), set the output in Administrator Preferences : Audio : Video Call
Audio Output.
LifeSize Room User Guide
button from the main screen to access the System menu.
button from the main screen to access the System menu.
27
Advertisement
Table of Contents
