System Management - LifeSize Room User Manual

System Management

Basic system management functions are available to all users, such as:
• Restarting the system
• Viewing call statistics
If you experience a problem with your LifeSize Room system, refer to the troubleshooting
guidelines described in "Troubleshooting" on page 33 or to your administrator for
assistance.
Restarting the System
The system restarts under the following circumstances:
• When you reboot the system (Diagnostics : System Reboot)
• When you reset the system to its default state (Diagnostics : System Reset)
• When you change network preferences (Administrator Preferences : Network)
To reboot the system, follow these steps:
1. Select the
2. Select the Diagnostics button and press OK.
3. Select the System Reboot button and press OK.
4. Select Yes to confirm the restart.
5. Wait for approximately one minute after restarting the system before attempting to place
a call.
To reset the system to its default state, refer to "Administering LifeSize Room" on page 23.
Note: If the user interface is not responding and you are unable to restart the system
by following these instructions, you can restart the system by pressing the reset button
on the back panel of the codec as described in "Restoring Default Settings" on page 39.
LifeSize recommends you do not unplug power from the codec to reboot it. Do not place
anything on top of or adjacent to the codec to obstruct the cooling vents.
LifeSize Room User Guide
button from the main screen to access the System menu.
32