Table of Contents
Advertisement
Camera Issues
Video from the camera appears in a small window on the main screen of the user interface
above the Redial list. If no video from the camera appears, do the following:
•
Ensure that the camera is properly connected to the LifeSize codec as described in
"Installing a LifeSize RoomTeam/Team MP System" on page 10.
•
Verify that the blue LED on the front of the camera is lit and not blinking, indicating that
power is active.
•
From the main screen of the user interface, press
Press
to access page 2 of the System Information page. Ensure that the status of
the camera is Ready.
•
Ensure that the primary input is set to the high definition camera.
Black Remote Control:
Press
on the remote control. If Primary Input : HD Camera does not appear at the
top of the screen, press
arrow keys on the remote control to select the appropriate high definition camera and
press OK.
Silver Remote Control:
Press
on the remote control. If Primary Input : HD Camera does not appear at the
top of the screen, press
the arrow keys on the remote control to select the appropriate high definition camera
and press OK.
Improving a Dim Image
If the image is too dim, you can adjust the HD Camera Brightness preference in User (or
Administrator) Preferences : Diagnostics : High Definition Camera.
Attached Video Input Device Not Working
When you connect a video input device that has capabilities not supported by a LifeSize
system, the status Out of range appears on the System Information page for that input.
The device may be in a mode that the codec does not support. Changing the mode may
help. Otherwise, the device is not supported.
20
to display the Primary Input selection dialog. Use the
again to display the Primary Input selection dialog. Use
to access the System Menu.
LifeSize Room Installation Guide
Advertisement
Table of Contents
