Table of Contents
Advertisement
Attached Video Input Device Not Working
When you connect a video input device that has capabilities not supported by a LifeSize
system, the status Out of range appears on the System Information page for that input.
The device may be in a mode that the codec does not support. Changing the mode may
help. Otherwise, the device is not supported.
Status Icons
The following table identifies the icons that can appear in the system status bar.
Icon
Network
Status
26
Condition
Indicates that the communication subsystem is initializing. If this icon
reappears after the system has booted, a problem has occurred. Reboot
the system.
Indicates that the system is initializing. When the system is initializing,
functionality on the main screen is disabled and no entries appear in the
REDIAL list. This icon also appears when a new device is connected to
the system after the system boots and disappears when the device is
ready. If the icon persists, a problem has occurred and rebooting the
system is necessary.
Indicates that the connected phone has been detected and the phone is
initializing. If the icon persists, a problem has occurred and rebooting the
system is necessary.
Indicates that the system does not have an active microphone. Check the
device's connections and then check the option you selected for the
Active Microphone preference.
Identifies the network status, as follows:
connected
(green indicator)
in progress
(yellow indicator)
disconnected
(red indicator)
LifeSize Room 200 Installation Guide
Hide quick links:
Advertisement
Table of Contents
