Xerox Phaser 3635MFP Service Manual page 238

NOTE: If the NVM default characters exceed 10 characters only the first eight characters are
displayed in the list. The full string is displayed in the Read/Write window.
NOTE: Selecting Reset will cause the selected NVM location to be reset to its default value.
Selecting Cancel closes the window and cancels any changes made in the now closed win-
dow.
NOTE: The CSE cannot read or modify any NVM that contains customer administrative or
accounting data.
NOTE: The Read Only (protected) NVM can only be changed using a password obtained from
Xerox.
Table 1 NVM chain 6
Location NVM Name NVM Description
06-100 Vertical Magni- The changed dimension of the
tude vertical direction magnitude.
06-110 Horizontal Magni- The changed dimension of the
tude horizontal direction magnitude.
Table 2 NVM chain 7
Location NVM Name NVM Description
07-100 Top Registration The changed dimension of tray
Tray 1 Simplex 1 top registration in simplex.
07-110 Side Registration The changed dimension of tray
Tray 1 Simplex 1 side registration in simplex.
07-120 Top Registration The changed dimension of tray
Tray 1 Dup_long 1 top registration of 2nd side in
(2nd side) duplex long.
07-130 Side Registration The changed dimension of tray
Tray 1 Dup_long 1 side registration of 2nd side
(2nd side) in duplex long.
07-140 Top Registration The changed dimension of tray
Tray 1 Duplex 1 top registration of 1st side in
(1st side) duplex long and short.
07-150 Side Registration The changed dimension of tray
Tray 1 Duplex 1 side registration of 1st side in
(1st side) duplex long and short.
07-200 Top Registration The changed dimension of tray
Tray 2 Simplex 2 top registration in simplex.
07-210 Side Registration The changed dimension of tray
Tray 2 Simplex 2 side registration in simplex.
General Procedures and Information
dC131
Location NVM Name
07-220
07-230
07-240
07-250
Value Default
0mm to 6mm 3
(12 steps / 07-500
0.5mm seg.)
0mm to 6mm 3
(12 steps / 07-510
0.5mm seg.)
07-520
Value Default
0mm to 6mm 3
07-530
(12 steps /
0.5mm seg.)
0mm to 6mm 3
07-540
(12 steps /
0.5mm seg.)
0mm to 6mm 3
07-550
(12 steps /
0.5mm seg.)
0mm to 6mm 3
(12 steps /
0.5mm seg.)
Location NVM Name
0mm to 6mm 3
(12 steps / 09-100
0.5mm seg.)
0mm to 6mm 3 09-110
(12 steps /
0.5mm seg.)
0mm to 6mm 3 09-120
(12 steps /
0.5mm seg.)
0mm to 6mm 3 09-130
(12 steps /
0.5mm seg.)
6-34
Table 2 NVM chain 7
NVM Description
Top Registration The changed dimension of tray
Tray 2 Dup_long 2 top registration of 2nd side in
(2nd side) duplex long.
Side Registration The changed dimension of tray
Tray 2 Dup_long 2 side registration of 2nd side
(2nd side) in duplex long.
Top Registration The changed dimension of tray
Tray 2 Duplex 2 top registration of 1st side in
(1st side) duplex long and short.
Side Registration The changed dimension of tray
Tray 2 Duplex 2 side registration of 1st side in
(1st side) duplex long and short.
Top Registration The changed dimension of
Bypass Simplex bypass top registration in sim-
plex.
Side Registration The changed dimension of
Bypass Simplex bypass side registration in sim-
plex.
Top Registration The changed dimension of
Bypass Dup_long bypass top registration of 2nd
(2nd side) side in duplex long.
Side Registration The changed dimension of
Bypass Dup_long bypass side registration of 2nd
(2nd side) side in duplex long.
Top Registration The changed dimension of
Bypass Duplex bypass top registration of 1st
(1st side) side in duplex long and short.
Side Registration The changed dimension of
Bypass Duplex bypass side registration of 1st
(1st side) side in duplex long and short.
Table 3 NVM chain 9
NVM Description
LD Light Level 600dpi laser light level. Value
in PWM.
MHV Control Bias Main charge bias control.
Control Basic of value (HVPS setting is
value). Value in PWM.
THV Bias Control Transfer bias control. Basic of
Control value (HVPS setting is value).
Value in PWM.
Deve Bias Control DEVE bias control. Basic of
value (HVPS setting is value).
Value in PWM standard volt-
age: --500V (PWM 522).
Value Default
0mm to 6mm 3
(12 steps /
0.5mm seg.)
0mm to 6mm 3
(12 steps /
0.5mm seg.)
0mm to 6mm 3
(12 steps /
0.5mm seg.)
0mm to 6mm 3
(12 steps /
0.5mm seg.)
0mm to 6mm 3
(12 steps /
0.5mm seg.)
0mm to 6mm 3
(12 steps /
0.5mm seg.)
0mm to 6mm 3
(12 steps /
0.5mm seg.)
0mm to 6mm 3
(12 steps /
0.5mm seg.)
0mm to 6mm 3
(12 steps /
0.5mm seg.)
0mm to 6mm 3
(12 steps /
0.5mm seg.)
Value Default
200 to 600 350
108 to 145 126
41 to 220 76
408 to 607 522
Draft 4
Phaser 3635MFP