LightSand S-2500B Installation And User Manual page 82

Show Configuration
This command displays all system, FC, IP, LGRP, card and port configuration data.
Example:
gateway/show# cfg
system.name:localhost
system.description:SAN Extension Gateway
system.location:End User Premise
system.contact:Field Support
system.ipAddr:10.1.1.164
system.netMask:255.255.255.0
system.eth0RipStatus:1
system.eth1RipStatus:1
system.state:1
system.restartMode:4
system.url:
system.type:3
system.wwn:10:00:00:05:E3:01:00:26
system.swRelease:1.0.2
system.build:build_pre3_36_041703
fc.mrdSize:2112
fc.edtov:2
fc.ratov:10
ip.defaultGateway:10.1.1.1
ip.ttl:64
ip.forwarding:1
lgrp.designation:3
lgrp.status:2
lgrp.ipAddress:0.0.0.0
lgrp.peerIpAddress:0.0.0.0
lgrp.netmask:0.0.0.0
lgrp.heartBeatInterval:3
lgrp.sotov:6
lgrp.inittov:10
lgrp.yield:0
lgrp.interfaceStatus:0