Table of Contents
Advertisement
IP and FC traffic
gateway:> config tp pos 1 create ch-c ip&fc
(The CLI then prompts for entry of additional parameters.)
Once a TP has been created its attributes can be configured, or it can be deleted:
Example: Set the description of POS 1:
gateway/config/tp/pos/1# desc "OPX TP 1"
To view the sub-context and current-context options at lower levels, use the "?" query for a
specified TP. Example: View the commands available for the IP option:
gateway/config/tp/pos/1# ip
gateway/config/tp/pos/1/ip# ?
Sub-Context: rip
Cur-Context:
ip-addr <ip-address> <net-mask>
routing-protocol <routing-protocol>
A-16
S-2500B Gateway
Advertisement
Table of Contents
