Configure IP Routing Table Data
These commands are used for creating or deleting an IP Routing Table entry for an interface
that already exists.
The following shows the level-specific prompt, the "?" request and the list of valid commands:
gateway/config/ip/route#
Sub-Context: (none)
Cur-Context:
Example: Create an IP routing table entry for the interface with the given name, IP address
and net mask.
gateway/config/ip/route#
create <InterfaceName> 10.0.0.1 255.255.255.0
For a list of valid interface names, refer to the routing information example in
System Level IP Data, on page
A-18
?
create <if-name> <dest-ipaddr> <dest-netmask>
delete <if-name> <dest-ipaddr> <dest-netmask>
A-23.
S-2500B Gateway
Show