Top Level Operational Commands
The following shows the top level prompt, the "?" request, and the list of valid commands:
gateway:> ?
Sub-Context: config show software
Cur-Context:
For discussions of the sub-context commands, see the following:
•
Configuration Commands (page A-8)
•
Show Commands (page A-20)
•
Software Commands (page A-34)
Configure Password (page A-19)
•
Current-context commands:
•
The logout or quit commands will close the CLI session.
•
At this level, up, exit and top have no effect.
•
ping can be used to see if a system is responding.
•
shutdown saves the configuration and powers the system off.
Note: Do not use the power button to shut the system down.
•
reboot restarts the system in "warm-active" mode, which automatically reactivates after it
restores the saved configuration.
up
exit
help
logout
quit
top
ping <host-ipaddr>
shutdown
reboot
CLI Reference
A-7