Configure System Level IP Channel Data
These commands are used for configuring IP channel attributes at the system level.
The following shows the level-specific prompt, the "?" request and the list of valid commands:
gateway/config/ip#
Sub-Context: route
Cur-Context:
Example: Set the gateway's IP time-to-live value at 44:
gateway/config/ip# ttl-value 44
For discussions of sub-context commands, see the following:
•
Configure IP Routing Table Data (page A-18)
?
ttl-value <ttl-value>
forwarding <forwarding>
def-rtg-gateway <def-rtg-gateway>
CLI Reference
A-17