CHAPTER 4
Troubleshooting
Your LightSand system is designed and tested to run trouble-free. If a problem does arise, use
the procedures described below, and do not hesitate to contact LightSand for help. Contact
information, including phone numbers, is available on our web site at www.lightsand.com.
Safety Precautions
These procedures should be undertaken only by personnel trained in their use, or experienced
in similar procedures. Do not attempt to service the system except as explained in this
document.
These procedures require that you work inside of the system. Working inside the system is
safe, if you observe the precautions emphasized in this section. Follow standard practices for
high voltage safety and for protecting equipment from ESD.
A fully loaded rack can be surprisingly heavy, and, if improperly loaded, can be top-heavy as
well. Before moving a rack of equipment or repositioning equipment within a rack, refer to the
LightSand Rack Installation Guide (part number 004-00004-00) for instructions, and consult
the manual provided by your rack manufacturer.
4-1