Table of Contents
Advertisement
At the prompt ("gateway:>" or the gateway's name, if it has already been configured),
4.
enter the command to display the current data for the system:
gateway:> show system info
Example response (note that the IP address is blank):
Name
Description :
IP Address
Net Mask
Type
Location
Contact
State
Up Time
Return to the top level, and enter the command to configure the system:
5.
gateway:> config sys
Enter the correct IP address, and a net mask of "255.255.255.0".
6.
Example:
gateway/config/system# ipaddr 192.168.1.185 255.255.255.0
Enter the correct default gateway address:
7.
Example:
gateway:> config ip def-rtg-gateway 192.168.1.1
Display the current system data to confirm the changes:
8.
gateway:> show system info
Example response:
Name
Description :
IP Address
Net Mask
Type
Location
Contact
State
Up Time
:
gateway
LightSand Gateway
:
:
:
S-2500B
:
Milpitas
:
Management Group
:
active
:
0 day(s), 00:15:02
:
gateway
LightSand Gateway
:
192.168.1.185
:
255.255.255.0
S-2500B
:
:
Milpitas
:
Management Group
:
active
:
0 day(s), 00:15:22
System Configuration
3-3
Advertisement
Table of Contents
