Installing The Generator - Yamaha XV1700P Service Manual

GENERATOR AND STARTER CLUTCH
5 - 77
2. Check:
• starter clutch operation
M MMM M MMM M M MMM M M MMM M
a. Install the starter clutch gear 1 onto the
starter clutch and hold the starter clutch.
b. When turning the starter clutch gear clock-
wise È, the starter clutch and the starter
clutch gear should engage, otherwise the
starter clutch is faulty and must be
replaced.
c. When turning the starter clutch gear coun-
terclockwise É, it should turn freely, other-
wise the starter clutch is faulty and must be
replaced.
L LLL L LLL L L LLL L L LLL L
EAS00354

INSTALLING THE GENERATOR

1. Install:
• starter clutch gear 1
• woodruff key
• generator rotor 2
• washer
• generator rotor bolt 3
NOTE:
_
• Clean the tapered portion of the crankshaft
and the generator rotor hub.
• When installing the generator rotor, make
sure the woodruff key is properly seated in
the keyway of the crankshaft.
2. Tighten:
• generator rotor bolt 1
130 Nm (13.0 m • kg, 94 ft • lb)
NOTE:
_
While holding the generator rotor 2 with the
primary sheave holder 3, tighten the genera-
tor rotor bolt.
Primary sheave holder
YS-01880-A
ENG
M MMM M M MMM M MMM
L LLL L L LLL L LLL