Yamaha XV1700P Service Manual page 54

Tool No.
Dynamic spark tester
YM-34487
This tool is used to check the ignition
system components.
Valve adjuster
YM-8035
This tool is used to adjust the valve
clearance.
Universal clutch holder
YM-91042
This tool is used to hold the clutch boss
when removing or installing the clutch
boss nut.
Primary sheave holder
This tool is used to hold the generator
YS-01880-A
rotor when removing or installing the
generator rotor bolt, generator shaft bolt
or crankshaft position sensor rotor bolt.
Piston pin puller
YU-01304
This tool is used to remove the piston
pins.
Micrometer (75 ~ 100 mm)
YU-03009
This tool is used to measure the piston
skirt diameter.
Cylinder bore gauge (50 ~ 100 mm)
YU-03017
This tool is used to measure the cylin-
der bore.
Pocket tester
YU-03112
This tool is used to check the electrical
system.
SPECIAL TOOLS
Tool name/Function
1 - 37
GEN
INFO
Illustration