FRONT WHEEL AND BRAKE DISCS
4 - 7
4. Adjust:
• brake disc deflection
M
MMM
M MMM
M
M MMM
M
M MMM
M
a. Remove the brake disc.
b. Rotate the brake disc by one bolt hole.
c. Install the brake disc.
NOTE:
_
Tighten the brake disc bolts in stages and in a
crisscross pattern.
Brake disc bolt
18 Nm (1.8 m • kg, 13 ft • lb)
®
LOCTITE
648
d. Measure the brake disc deflection.
e. If out of specification, repeat the adjustment
steps until the brake disc deflection is within
specification.
f. If the brake disc deflection cannot be
brought within specification, replace the
brake disc.
L
LLL
L LLL
L
L LLL
L
L LLL
L
EAS00544
INSTALLING THE FRONT WHEEL
The following procedure applies to both of the
brake discs.
1. Install:
• brake discs
18 Nm (1.8 m • kg, 13 ft • lb)
NOTE:
• Apply locking agent (LOCTITE
threads of the brake disc bolts.
• Tighten the brake disc bolts in stages and in
a crisscross pattern.
CHAS
M MMM
M
M MMM
M
MMM
L LLL
L
L LLL
L
LLL
®
648) to the