Yamaha XV1700P Service Manual page 301

CAMSHAFTS
6. Tighten:
• camshaft driven gear nut 1
NOTE:
_
• Place a folded copper washer 2 between
the teeth of the camshaft drive gear and
camshaft driven gear in order to lock them.
• Do not damage the teeth of the camshaft
drive and camshaft driven gear.
• After tightening the camshaft driven gear nut,
remove the copper washer to clean the teeth
of the camshaft drive gear and camshaft
driven gear.
7. Tighten:
• camshaft drive gear bolt 1
• front cylinder camshaft end cover bolts 2
NOTE:
_
• Place a folded copper washer 3 between
the teeth of the camshaft drive gear and
camshaft driven gear in order to lock them.
• Do not damage the teeth of the camshaft
drive and camshaft driven gear.
• After tightening the camshaft drive gear bolt,
remove the copper washer to clean the teeth
of the camshaft drive gear and camshaft
driven gear.
5 - 33
ENG
52 Nm (5.2 m • kg, 37 ft • lb)
30 Nm (3.0 m • kg, 22 ft • lb)
10 Nm (1.0 m • kg, 7.2 ft • lb)