Yamaha XV1700P Service Manual page 501

17.Oil temperature sensor resistance
• Remove the oil temperature sensor from
the oil tank.
• Connect the pocket tester (Ω × 100) to the
oil temperature sensor terminal as shown.
• Immerse the oil temperature sensor 1 in a
container filled with engine oil 2.
NOTE:
_
Make sure that the oil temperature sensor ter-
minals do not get wet.
• Place a thermometer 3 in the engine oil.
• Slowly heat the engine oil, then let it cool
down to the specified temperature.
3
1
2
• Measure the oil temperature sensor resis-
tance.
Oil temperature sensor
resistance
308 ~ 339 Ω at 150 °C (302 °F)
209 ~ 231 Ω at 170 °C (338 °F)
WARNING
• Handle the oil temperature sensor with
special care.
• Never subject the oil temperature sensor
to strong shocks. If the oil temperature
sensor is dropped, replace it.
Oil temperature sensor
18 Nm (1.8 m · kg, 13 ft · lb)
• Is the oil temperature sensor OK?
YES
FUEL INJECTION SYSTEM
NO
Replace the oil tem-
perature sensor.
7 - 63
EAS00818
18.Wiring
• Check the entire fuel injection system's
wiring.
Refer to "CIRCUIT DIAGRAM".
• Is the fuel injection system's wiring prop-
erly connected and without defects?
YES
Replace the ECU.
– +
ELEC
NO
Properly connect or
repair the fuel injec-
tion system's wiring.