Installing The Cylinder Head Covers - Yamaha Star XVS950A 2009 Service Manual

11. Install:
• Rear cylinder timing chain tensioner gas-
ket "1"
New
• Rear cylinder timing chain tensioner "2"
TIP
To push in the timing chain tensioner rod,
release the lock by pushing in the one-way
cam "6".
Rear cylinder timing chain ten-
sioner bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
12. Install:
• Timing chain tensioner spring "5"
• Copper washer "4"
• Timing chain tensioner cap bolt "3"
Timing chain tensioner cap bolt
24 Nm (2.4 m·kgf, 17 ft·lbf)
13. Measure:
• Valve clearance
Out of specification → Adjust.
Refer to "ADJUSTING THE VALVE
CLEARANCE" on page 3-5.
EAS5S71009
INSTALLING THE CYLINDER HEAD COV-
ERS
1. Install:
• Rear cylinder side cover
• Tappet covers
Rear cylinder side cover bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Tappet cover
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
2. Install:
• Front cylinder side cover
• Tappet covers
Front cylinder side cover bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Tappet cover
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
5-20
CAMSHAFTS