Yamaha XV1700P Service Manual page 251

HANDLEBAR
13.Install:
• brake master cylinder
• brake master cylinder holder
NOTE:
_
• Install the brake master cylinder holder with
the "UP" mark facing up.
• Align the end of the brake master cylinder
holder with the punch mark a in the handle-
bar.
• First, tighten the upper bolt, then the lower
bolt.
14.Connect:
• front brake light switch connectors
15.Install:
• plastic clamps
NOTE:
_
Refer to "CABLE ROUTING" in chapter 2.
16.Adjust:
• clutch cable free play
Refer to "ADJUSTING THE CLUTCH
CABLE FREE PLAY" in chapter 3.
Clutch cable free play (at the end
of the clutch lever)
10 ~ 15 mm (0.39 ~ 0.59 in)
17.Adjust:
• throttle cable free play
Refer to "ADJUSTING THE THROTTLE
CABLE FREE PLAY" in chapter 3.
Throttle cable free play (at the
flange of the throttle grip)
4 ~ 6 mm (0.16 ~ 0.24 in)
4 - 74
CHAS
10 Nm (1.0 m • kg, 7.2 ft • lb)