Adjusting The Meter Light; Adjusting The Clock - Yamaha XV1700P Service Manual

INSTRUMENT FUNCTIONS

ADJUSTING THE METER LIGHT

1. Adjust:
• meter light
M MMM M MMM M
a. Turn the key to "OFF".
b. Push and hold the "SELECT" button.
c. Turn the key to "ON", and then after five
seconds, release the "SELECT" button.
d. Push the "RESET" button to select the
desired brightness.
e. Push the "SELECT" button to set the bright-
ness level.
f. Turn the key to "OFF"
NOTE:
When adjusting the meter lighting, the odome-
ter display will indicate the brightness level.
L LLL L LLL L
EAS00187

ADJUSTING THE CLOCK

NOTE:
_
This digital clock constantly displays the time.
1. Adjust:
• clock
M MMM M MMM M
a. Push the "SELECT" button and "RESET"
button together for at least two seconds.
b. When the hour digits start flashing, push
the "RESET" button to set the hours.
c. Push the "SELECT" button, and the minute
digits will start flashing.
d. Push the "RESET" button to set the min-
utes.
e. Push the "SELECT" button and then
release it to start the clock.
NOTE:
• After setting the clock, be sure to push the
"SELECT" button before turning the key to
"OFF", otherwise the clock will not be set.
• When setting the time (e.g., after reconnect-
ing the battery), first set the clock to 1:00 AM,
and then set it to the correct time.
L LLL L LLL L
3 - 71
CHK
ADJ
M MMM M M MMM M M MMM M M MMM M
L LLL L L LLL L L LLL L L LLL L
M MMM M M MMM M M MMM M M MMM M
L LLL L L LLL L L LLL L L LLL L
MMM
LLL
MMM
LLL