Camera Process Menu Screen - JVC GY-DV5000 Instructions Manual

11. MENU SCREENS

11-6CAMERA PROCESS MENU Screen

The CAMERA PROCESS menu screen is only displayed in the Camera mode.
Item
MASTER Adjusts the pedestal level (master black), which is the reference of black.
● To increase the pedestal level .... Increase the number. (UP)
BLACK
● To decrease the pedestal level ... Decrease the number. (DOWN)
DETAIL Adjusts the detail enhancement level.
● To sharpen details ....................... Increase the number. (UP)
● To soften details .......................... Decrease the number. (DOWN)
Note:
When LOLUX is ON, "FIX" is displayed and setting is not possible.
DTL. V/H Sets the direction, horizontal (H) or vertical (V), in which stronger detail
BALANCE enhancement is applied.
To strengthen the H enhancement ...... Increase the number (UP).
To strengthen the V enhancement ...... Decrease the number (DOWN).
Note:
When LOLUX is ON, "FIX" is displayed and setting is not possible.
SKIN DTL Sets the Skin Detail function to ON or OFF.
DETECT ON :Skin Detail function activated.
OFF :Skin Detail function not activated.
See "Using the Skin Detail Function" on page 86.
SCAN Increases the vertical resolution.
● VIDEO
● FRAME MODE :Vertical resolution 450 lines
Note:
In the FRAME MODE the bright sections may be coloured depending
on the colour temperature of the subject.
WHITE CLIP Sets the point where white clipping is to take place for an input video
signal with a high luminance level.
108% :The luminance level is white-clipped at the point of 108%.
100% :The luminance level is white-clipped at the point of 100%. If the
screen appears too white even with the point set at 108%, set the
point at 100%.
KNEE Sets the knee point (brightness level) when the AUTO KNEE function is
POINT set to OFF.
ADVANCED Displays the ADVANCED PROCESS Screen.
PROCESS See "ADVANCED PROCESS Screen" on page 71.
PAGE BACK The TOP MENU returns when the SHUTTER dial is pressed with the
cursor at this position.
70
Function
:Vertical resolution 380 lines.
Variation Range Initial Setting
MAX (10) NORMAL
9
to
NORMAL (0)
to
–9
MIN (–10)
MAX (10) NORMAL
9
to
NORMAL (0)
to
–9
MIN (–10)
H-MAX (5) NORMAL
4
to
NORMAL (0)
to
–4
H-MIN (–5)
ON OFF
OFF
VIDEO VIDEO
FRAME MODE
108% 108%
100%
100% 100%
96%
92%
88%
84%
80%
––––– –––––