Shooting Operation; Basic Recording Operation - JVC GY-DV5000 Instructions Manual

7. SHOOTING OPERATION

7-1 Basic Recording Operation

EDITSEARCH
FILTER
1 3200K
2 5600K / 1 8 ND
.3 5600K
.4 5600K 1 64 / ND
STATUS
SHUTTER
MENU
AUTO IRIS FULL AUTO
BACK L
NORMAL
SPOT L
POWER
ON OFF
POWER VTR
ON OFF
1.
7, 8, 9,
6.
Focusing ring
7. 8. 9.
8.
TALLY lamp
OFF ZEBRA
SKIN
ON
AREA
VTR
7. 8. 9.
VTR trigger button
52
3.
OPEN knob
OPEN
MONITOR
LCD BRIGHT DISPLAY
AUDIO
LEVEL PULL
OPEN
FRONT
REAR
BLACK LOLUX CH-1 CH-2
CH-1 CH-2
MODE
AUDIO INPUT
STRETCH AUDIO SELECT
VTR
NORMAL CH-1 CH-2
COMPRESS AUTO
CAM MANUAL
VTR
MODE
VTR
CAM
2.
EDITSEARCH
MONITOR
FILTER
1 3200K
5600K / ND
2 1 8
.3 5600K
5600K / ND
.4 1 64
STATUS
SHUTTER
MENU
AUTO IRIS FULL AUTO BLACK LOLUX
MODE
BACK L STRETCH
VTR
NORMAL NORMAL
SPOT L COMPRESS
CAM
POWER
VTR
ON OFF
6.
Zoom ring
VTR trigger button
AUTO
WHITE
ACCU
FOCUS
AUDIO
LEVELE CH-1
5
1.
Set the POWER switch to ON.
● Power is supplied to the unit.
2.
The CAM indicator lights up.
The GY-DV5000 is in the Camera mode when the CAM
indicator is on.
3.
Slide the OPEN switch on the top section to open the
cassette cover.
4.
Insert a videocassette into the cassette insertion slot.
● Ensure that the erasure-prevention switch on the back of
the cassette is set to REC and insert a videocassette
properly.
When the cassette is inserted, the tape is loaded and the
unit enters the record-standby mode.
● Slowly close the cassette cover.
MEMO:
● Use a standard DV videocassette or a MiniDV
videocassette. (When a DVCAM cassette is used for
recording, longer recording can be performed than the
time indicated on the DVCAM cassette. For the recording
time, regard the remaining tape indication displayed on
the LCD or in the viewfinder as a guide.)
● Following loading of the cassette and when the POWER
switch is turned ON/OFF, the built-in head cleaner will
emit a sound while operating. This does not indicate a
malfunction.
● After the cassette cover is closed, it takes about 10
AUDIO
LEVEL
CH-1 CH-2
CH
A
seconds before the unit is ready for recording.
CH
5.
Adjust the camera section settings and the white balance.
See "Camera Settings" on page 45.
See "White Balance Adjustment" on page 48.
6.
Point the camera at the subject and determine the angle of
view and focus with the zoom lever and the focusing ring.
7.
Start recording.
Press the VTR trigger button on the GY-DV5000 to start
recording.
Once recording has started, the BACK TALLY lamp on the
rear section of the unit and the tally lamp on the viewfinder
light red, and the REC indication in the viewfinder lights
green.
MEMO:
The lightening conditions of the BACK TALLY lamp on
the rear section of the unit and the tally lamp on the
viewfinder can be changed by setting the BACK TALLY
and FRONT TALLY items on the OTHERS (2/2) menu
screen.