Camera Process [1/2] Menu Screen - JVC GY-HD110 Instructions Manual

CAMERA PROCESS [1/2] Menu Screen

The CAMERA PROCESS menu screen consists of two screens. (1/2 screen, 2/2 screen)
The CAMERA PROCESS menu screen is only displayed in camera mode.
Item
MASTER BLACK Adjusts the pedestal level (master black) that serves as the reference black.
Increase the number : Raises the pedestal level.
Decrease the number : Lowers the pedestal level.
[Settings: MIN (–10), –9 - NORMAL (0) - 9, MAX (10)]
DETAIL Adjusts the contour (detail) sharpness level.
Increase the number : Sharpens the contour.
Decrease the number : Softens the contour.
OFF
[Settings: OFF, MIN (–10), –9 - NORMAL (0) - 9, MAX (10)]
When this item is set to "OFF", "-----" is displayed for the following menu items and they cannot be selected.
V/H BALANCE Sets which contours (details) to sharpen, those in the horizontal (H) direction or those in the vertical (V) direction.
Increase the number : Sharpens H direction.
Decrease the number : Sharpens V direction.
[Settings: H-MIN (–5), –4 - NORMAL (0) - 4, H-MAX (5)]
H FREQUENCY Changes the horizontal contour compensation frequency for the contours (details). Set this as appropriate for the
subject.
LOW
MIDDLE
HIGH
*1
V FREQUENCY Use this when shooting subjects with finely detailed patterns.
Changes the vertical contour compensation frequency for the contours (details). Compensates for distortion when
outputting progressive video to an interlaced monitor.
HIGH
LOW
SKIN DETECT Sets ON/OFF for the skin detail function.
OFF
ON
X See "Using the Skin Detail Function" on page 87.
LEVEL Sets the contour compensation level (amount of softening) for the skin detail function.
This can only be selected when the SKIN DETECT item is set to ON.
–1
–2
–3
BLACK Changes the gain in dark areas. Change this depending on the video signal being shot.
STRETCH1
STRETCH2
STRETCH3
NORMAL
COMPRESS1 : If the video that was shot is bright overall and lacking in contrast, the gain in the dark areas is com-
COMPRESS2
COMPRESS3
NEXT PAGE To display the CAMERA PROCESS [2/2] menu screen, move the cursor to this position and press the SHUTTER
dial.
PAGE BACK The TOP MENU returns when the SHUTTER dial is pressed while the cursor is at this position.
*1 When the REC item on the VIDEO FORMAT menu is set to "DV-60I" or "DV-50I", "-----" is displayed and this cannot be
selected.
Function/Setting (bold characters indicate initial settings)
: Does not function.
: Enhances low frequency bands.
Use this when shooting subjects with large patterns.
: Enhances middle frequency bands.
: Enhances high frequency bands.
Use this when shooting subjects with small patterns.
: Enhances high frequency bands.
: Enhances low frequency bands.
: Turns off the skin detail function.
: Turns on the skin detail function. (Softens detected skin color area details.)
: Low contour compensation level (amount of softening)
: Medium contour compensation level (amount of softening)
: High contour compensation level (amount of softening)
: Enhances the dark areas of the video so the contrast between light and dark is more visible by
stretching the signal only in the dark areas.
The amount of stretching increases from STRETCH1→STRETCH2→STRETCH3.
: Normal status
pressed, which adds contrast.
The amount of compression increases from COMPRESS1→COMPRESS2→COMPRESS3.
MENU SCREENS
67