Setting And Adjustments Before Shooting; Camera Settings; Screen Size (4:3/Letter) Mode Selection - JVC GY-DV5000 Instructions Manual

6. SETTING AND ADJUSTMENTS BEFORE SHOOTING

6-1 Camera Settings

3.
EDITSEARCH
FILTER
1 3200K
2 5600K 1 8 / ND
5600K
.3
.4 5600K 1 64 / ND
STATUS
SHUTTER
MENU
AUTO IRIS FULL AUTO BLACK
BACK L STRETCH
NORMAL NORMAL
SPOT L COMPRESS
POWER VTR
ON OFF
2.
B C D A
VF
ZEBRA
OFF
SKIN
ON
AREA
VTR AUDIO
LEVELE CH-1
5

6-2 Screen Size (4:3/LETTER) Mode Selection

The screen size of recorded images can be selected with the ASPECT RATIO item on the CAMERA OPERATION menu screen.
See page 69.
● To record using the standard screen, set ASPECT RATIO to 4:3.
● When ASPECT RATIO is set to LETTER, the image is recorded in a 16:9 aspect ratio with the upper and lower parts of the image
cut. In this case, the viewfinder screen or LCD will show the 16:9 aspect ratio image with the upper and lower parts of the image
cut.
MEMO:
● The safety zone of the standard screen and the 16:9 screen can be displayed in the viewfinder or LCD by setting the
SAFETY ZONE item on the LCD/VF (1/2) menu screen.
● When ASPECT RATIO is set to LETTER, 16:9 aspect ratio distinction ID signal is output from the Y/C OUT terminal.
● When setting DATE REC in the TIME/DATE menu screen to "BARS" or "BARS+CAM", the screen size will be fixed at an
aspect ratio of 4:3.
OPEN
MONITOR
LCD BRIGHT DISPLAY
AUDIO
PULL
LEVEL
OPEN
FRONT
REAR
LOLUX
CH-1 CH-2
CH-1 CH-2
MODE AUDIO INPUT
AUDIO SELECT
VTR
CH-1 CH-2
AUTO
CAM MANUAL
1.
CAM
indicator
POWER VTR
ON OFF
4.
5.
AUTO
WHITE
ACCU
FOCUS
1.
POWER SUPPLY
1 First place a charged battery pack in the battery case on
the rear section of the unit. If battery pack is not used,
connect DC power to the DC INPUT connector on the
rear section of the unit using the AC power adapter (AA-
P250) to supply DC 12 V current.
2 Set the POWER switch to ON.
2.
SWITCH positions
A. MODE switch: Camera mode (CAM indicator should be
on).
B. [GAIN] switch: Set to L. The L position is always 0 dB.
C. [OUTPUT] switch: Set to CAM-AUTO KNEE OFF.
D. [WHT. BAL] (Auto White Balance) switch: Set to A or B.
3.
Set the lens' iris mode switch to "A" (AUTO IRIS side)
4.
Choose the proper color temperature conversion filter.
FILTER
1 3200K
2 5600K+1/8ND
3 5600K
4 5600K+1/64ND
5.
Using the SHUTTER dial, set the shutter speed to OFF
(1/60).
See page 73.
Suitable Location
Indoors, dark outdoors
Outdoors under clear sky
Outdoors
Outdoors under clear sky
45