Camera Operation Menu Screen; Camera Process Menu Screen - JVC GY-DV5100 Instructions Manual

11-5 CAMERA OPERATION Menu Screen

The CAMERA OPERATION menu screen is only displayed in the Camera mode.
Item Function
SHUTTER The SHUTTER button on the right side section is used to select STEP for
fixed shutter speed or V.SCAN variable scanning rate for shooting computer
monitor screens.
STEP :Enables setting of different fixed shutter speeds. [1/7.5, 1/
15, 1/30, 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000,
1/10000]
VARIABLE :Selected when shooting computer monitor screens, etc.
[Variable range: 60.1 to 2084.6 Hz]
FAW Selects the W.BAL switch ( on page 14) position to which the FAW
(Full-Time Auto White Balance Adjustment) function is to be assigned.
NONE :FAW function is not used.
A :FAW is assigned to the A position.
B :FAW is assigned to the B position.
PRESET :FAW is assigned to the PRESET position.
GAIN L Selects the gain value in each position of the GAIN switch (
GAIN M 14).
GAIN H
LOLUX GAIN Sets the gain up value when in the LOLUX mode.
(SS: Shutter speed 1/30)
SMOOTH Smoothens the transition when the GAIN switch (
TRANS WHT.BAL switch ( on page 14) is switched over and achieves gradual
change in place of sudden change.
However, the smooth transition function does not function when switching
the GAIN switch set in ALC, FAS button and the LOLUX button.
ON :Activates the smooth transition function.
OFF :Deactivates the smooth transition function.
SPOT L/ Sets the level of auto iris when setting the AUTO IRIS switch to BACK L or
BACK L SPOT L.
LOW : Lowers the iris level.
MIDDLE : Opens/Closes the iris by 1 step from the standard state.
HIGH : Raises the iris level.
ASPECT Sets the image size of the video signal.
RATIO 4:3 :4:3 aspect ratio image output.
LETTER :LETTER BOX (16:9 aspect ratio) image output.
SQUEEZE :SQUEEZE: Images in aspect ratio 16:9 are displayed in
aspect ratio 4:3.
● When setting DATE REC in the TIME/DATE menu screen to BARS or
BARS+CAM, the screen size will be fixed at an aspect ratio of 4:3.
● When ASPECT RATIO is set to LETTER or SQUEEZE, 16:9 aspect
ratio distinction ID signal is outputted from the Y/C OUT terminal.
PAGE BACK The TOP MENU returns when the SHUTTER dial is pressed with the
cursor at this position.
11. MENU SCREENS
Variation Range Initial Setting
STEP STEP
VARIABLE
NONE NONE
A
B
PRESET
on page –3dB L: 0dB
0dB M: 9dB
3dB H: 18dB
6dB
9dB
12dB
15dB
18dB
ALC
24dB 30dB
24dB+SS
30dB
30dB+SS
36dB
36dB+SS
on page 14), or ON OFF
OFF
LOW MIDDLE
MIDDLE
HIGH
4:3 4:3
LETTER
SQUEEZE
––––– –––––
75
11. MENU SCREENS

11-6 CAMERA PROCESS MENU Screen

The CAMERA PROCESS menu screen is only displayed in the Camera mode.
Item Function
MASTER Adjusts the pedestal level (master black), which is the reference of black.
● To increase the pedestal level ..... Increase the number. (UP)
BLACK
● To decrease the pedestal level .... Decrease the number. (DOWN)
DETAIL Adjusts the detail enhancement level.
● To sharpen details ....................... Increase the number. (UP)
● To soften details .......................... Decrease the number. (DOWN)
Note:
When LOLUX is ON, "FIX" is displayed and setting is not possible.
DTL. V/H Sets the direction, horizontal (H) or vertical (V), in which stronger detail
BALANCE enhancement is applied.
To strengthen the H enhancement ...... Increase the number (UP).
To strengthen the V enhancement ...... Decrease the number (DOWN).
Note:
When LOLUX is ON, "FIX" is displayed and setting is not possible.
DTL. Varies the detail enhancement level by changing the detail
FREQUENCY enhancement frequency.
Set in accordance with the subject.
LOW ------ Lowers the frequency for contour highlight.
Use this when shooting objects with large patterns.
MIDDLE --- Sets the frequency for contour highlight to standard.
HIGH ------ Increases the frequency for contour highlight.
Use this when shooting objects with fine patterns.
Note:
When LOLUX is ON, "FIX" is displayed and setting is not possible.
76
Variation Range Initial Setting
MAX (10) NORMAL
9
to
NORMAL (0)
to
–9
MIN (–10)
MAX (10) NORMAL
9
to
NORMAL (0)
to
–9
MIN (–10)
H-MAX (5) NORMAL
4
to
NORMAL (0)
to
–4
H-MIN (–5)
LOW MIDDLE
MIDDLE
HIGH