Setting Menu Screens - JVC GY-DV5000 Instructions Manual

11. MENU SCREENS

11-2Setting Menu Screens

EDITSEARCH
FILTER
1 3200K
2 5600K 1 8 / ND
.3 5600K
.4 5600K 1 64 / ND
STATUS
SHUTTER
MENU
AUTO IRIS FULL AUTO BLACK
BACK L
NORMAL
SPOT L
POWER VTR
ON OFF
STATUS button
SHUTTER
SHUT-
MENU
TER
dial
MENU screen
Cursor
––– MENU –––
CAMERA OPERATION..
CAMERA PROCESS..
AUDIO/VIDEO..
LCD/VF..
TC/UB/CLOCK..
OTHERS..
FILE MANAGE..
MENU ALL RESET
EXIT
TOP MENU screen
Item
––– CAMERA OPERATION –––
SHUTTER
FAW
GAIN L
GAIN M
GAIN H
LOLUX GAIN
SMOOTH TRANS
SPOT L/BACK L
ASPECT RATIO
PAGE BACK
CAMERA OPERATION MENU screen
66
OPEN
MONITOR
LCD BRIGHT DISPLAY
AUDIO
PULL
LEVEL
OPEN
FRONT
REAR
LOLUX
CH-1 CH-2
CH-1 CH-2
MODE AUDIO INPUT
STRETCH AUDIO SELECT
VTR
NORMAL CH-1 CH-2
COMPRESS AUTO
CAM
MANUAL
STA
CANCEL
Setting
STEP
PRESET
6dB
9dB
ALC
30dB
ON
MID
4:3
Make the settings while observing the LCD monitor or the
viewfinder screen. If the OUTPUT CHAR. item on the OTHERS
(1/2) screen is set to ON, the menu screen can also be viewed
on a monitor connected to the MONITOR OUT or Y/C OUT
connector.
1.
Set the POWER switch to ON.
2.
Set the mode of the GY-DV5000 with the MODE switch.
(Camera mode or VTR mode)
3.
Press the STATUS button for 1 second or longer.
● The TOP MENU screen appears.
4.
Select the menu screen to be set.
Rotate the SHUTTER dial to align the cursor ( ) with the
menu screen to be set, and then press the SHUTTER dial.
● The selected menu screen appears.
5.
Select the menu item on the menu screen.
Rotate the SHUTTER dial to align the cursor ( ) with the
item to be set, and then press the SHUTTER dial.
● The setting area of the selected item starts blinking, and
the setting can now be made.
6.
Change the setting.
Rotate the SHUTTER dial to change the setting, and then
press the SHUTTER dial.
● The setting area stops blinking and the setting is entered.
To change multiple items, repeat the procedures in steps
6.
and above.
7.
Return to the TOP MENU.
Rotate the SHUTTER dial to align the cursor ( ) with the
PAGE BACK item, and then press the SHUTTER dial.
To change settings on other menu screens, repeat the
4.
procedures in steps to
To save the set contents in FILE CAM1 or CAM2, select the
FILE MANAGE menu screen and perform the operations for
saving to file. See "FILE MANAGE Menu Screen" on page
67.
8.
To return to the normal screen after completing the settings,
use either of the following methods.
● Press the STATUS button
or
● Return to the TOP MENU screen and align the cursor ( )
with the EXIT item, and then press the SHUTTER dial.
7.
above.
5.