Displaying The Time And Date On The Screen - JVC GY-DV5000 Instructions Manual

Displaying the Time and Date on the Screen

TC/UB/CLOCK menu screen
––– TC/UB/CLOCK –––
TC PRESET
TC CLEAR
UB PRESET
UB CLEAR
DROP/NON DROP DROP
TIME/DATE..
PAGE BACK
TIME/DATE menu screen
––– TIME/DATE –––
DISPLAY
DISPLAY MODE
DATE REC
DISPLAY STYLE
DATE STYLE
TIME STYLE
SEC DISPLAY
CLOCK ADJUST..
PAGE BACK
01/02/03 AM01:23:45
Date
Recording the Date and Time Data
TIME/DATE menu screen
––– TIME/DATE –––
DISPLAY
DISPLAY MODE
DATE REC
DISPLAY STYLE
DATE STYLE
TIME STYLE
SEC DISPLAY
CLOCK ADJUST..
PAGE BACK
00:00:00:00
EXECUTE
CANCEL
00 00 00 00
EXECUTE
CANCEL
ON
BARS+CAM
OFF
DATE+TIME
MM/DD/YY
24HOUR
ON
FAS
–3dB
FAW
I
SD
B
12.2V
Time
ON
BARS+CAM
BARS+CAM
DATE+TIME
MM/DD/YY
24HOUR
ON
5. PREPARATIONS
Whether or not the time and date should be displayed on the
screen and how to display them are set on the TIME/DATE
menu screen.
1.
Display the TIME/DATE menu screen.
1 Select the TC/UB/CLOCK item on the TOP MENU
screen.
2 Select the TIME/DATE item on the TC/UB/CLOCK menu
screen.
2.
Set the TIME/DATE menu screen.
● DISPLAY item
● DISPLAY MODE item : Sets the video output mode in
BARS : Displayed when the OUTPUT switch
on the side section is set to BARS.
CAM : Displayed when the OUTPUT switch
on the side section is set to CAM.
BARS + CAM : Date and time are always displayed.
● DISPLAY STYLE : Sets the style in which the date and
time are displayed.
DATE + TIME: Date and time are displayed.
DATE : Date only is displayed.
TIME : Time only is displayed.
Display of date and time in the various operation modes.
In Camera mode : The date and time of the internal
clock are displayed.
In VTR playback mode : The date and time recorded on the
tape are displayed.
In VTR stop mode : The date and time of the internal
clock are displayed.
During DV signal input : The date and time from the DV
connector are displayed.
To record the date and time data during shooting, make the
menu settings described below. When the DATE REC item on
the TIME/DATE menu screen is set to "BARS" or "BARS+CAM",
the screen size will be fixed at an aspect ratio of 4:3.
Setting the TIME/DATE menu
● DISPLAY item
: Set to ON.
● DATE REC item : Select the video mode in which date
and time data should be recorded.
BARS : Date and time data are recorded only
when color bars are output.
BARS+CAM : Date and time data are recorded when
color bars and camera image are output.
OFF : Date and time data are not recorded.
MEMO:
DATE REC cannot be set during recording.
: Sets whether or not date and
time should be displayed. Set
to ON to display the indications.
which date and time should be
displayed.
43